Looking to control your Honeywell Thermostat using remotely through the internet then we have something for you that might help you.

To control the status of the Honeywell Thermostat remotely you will be needed to have its Wi-Fi Setup and registration so that your Honeywell Thermostat could get registered with the Wi-Fi and you will be then able to control it through the internet.

Sale
Honeywell Home Home RTH6360D1002 Programmable Thermostat, 5-2 Schedule, 1-Pack, White
  • Flexible programming: 5-2 day or one week programming LCD Screen
  • Large backlit display shows current room temperature and set point temperature simultaneously
  • Smart response learning - learns your heating/cooling cycle times to deliver the right temperature...
  • Auto change from heat to cool
  • Includes change reminders for air filters and low batteries

Do I need to Register my Honeywell Thermostat?

Do I need to Register my Honeywell Thermostat

Well, to control your Honeywell Thermostat remotely also then in that case only you will be needed to register your Honeywell Thermostat and Wi-Fi Setup. For this, there are a set of instructions that you will have to follow to get the registration done and

Honeywell Wi-Fi Thermostat Registration Steps

We will be walking you through the registration steps that you need to do to use the Wi-Fi mode of the Honeywell Thermostat. So, you can now follow these steps accordingly so that you will be able to control the status of the Honeywell Thermostat.

Then, in this case, you will have to register through the TCC portal where they will need all your data regarding the setup, and then they will set up your account to use remotely.

How to Connect Thermostat to Wi-Fi?

To connect your thermostat to the Wi-Fi then in that case you open the menu and then scroll After reaching the Network tab, enter the network menu.

Inside the network menu, there will be a Mode option that you have to click. After that it will start your WPS and then you will see that your thermostat has been connected to the router.

Step 1: Install Your Honeywell Wi-Fi Thermostat

You can also skip this step if you already have the thermostat installed and the power is on. When the home screen is visible then that means it is already powered on and active. In that case, you can skip this step and then move on to the next one.

If not, then in this step all you need to do is to install your thermostat and turn its power on and once the home screen appears then you can conclude that it is working fine.

Step 2: Connect Your Thermostat to Your Wi-Fi Network with Internet Access

Connect Your Thermostat to Your Wi-Fi Network

The next step is to connect the thermostat to your internet-ready Wi-Fi network. This will ensure that the thermostat is now connected to an internet source through which it will be controlled. If you have not already done this step, then you can connect your thermostat to an internet-ready source. This source should be connected to your Wi-Fi.

Step 3: Create Your Account on the TCC Site Honeywell Wi-Fi Thermostat Registration

notification

The most important thing in this whole process is to have your account through which you will be controlling the whole scenario. For this, you will be required to register to the TCC Site where you will be creating your account. This account will be responsible for all your work in handling the thermostat remotely.

Step 4: Gather Thermostat Information

Gather Thermostat Information

Now, after creating your TCC account, add your thermostat to this account that you have just created. For this, you will be needed to provide its MAC address and CRC code.

This information can be found in the documentation that Honeywell would have provided you. You can look at the documentation and then provide all the required details.

Though you can also find this information from the thermostat itself. Also, when you are not too sure then you can always look in the documentation and then provide the correct fields that are needed. Once you are done, then you can move to the next step.

Step 5: Enabling Home Screen

The first and the foremost thing that you will be needed to do is to open the Home Screen of the Thermostat.

Once the screen is opened then you will see a yellow-colored message box where some messages will be displayed. Along with this, it will be showing you temperature and humidity.

You now must click on the yellow message box. This box will be there on the left side of the home screen. This message box will show you that online registration is needed.

jpg to recover

Step 6: Wi-Fi Setup

The yellow message box that says that you are now required to register online, go to the Wi-Fi setup that was being displayed over there. In this scenario, connect your thermostat to the network that you have set up in your house for controlling the thermostat remotely.

There only you need to mention the MAC address and the CRC number so that the device gets connected with the internet.

Step 7: Visit the Honeywell Total Connect Comfort Web Site

Here, enter your TCC Account Username and Password and then you are all set to go. If you have followed each step till now, then you will now be able to login into this portal and will now be able to control the Thermostat using the internet.

The next steps are just to make sure that you can log in. You will see a red login button and there only you must log in.

Log into the portal and you will see that there is an option that needs your location information. So, for this, you can feed the details of your location.

You can fill in all those details that are required in this portal so that your location information gets saved on the device.

Once you submit this location information then you are all set to launch it and hence you will now be able to control the status of the thermostat remotely.

How to Change and Add the Settings?

Another quite important thing is the settings option and how to change or add any additional settings that you wish to add. When you open the settings for this device you will see an option to edit the location which you can click to do any modification.

Here, you can add a new device. Again, you will enter all the information that will be required in the portal, and then you can add that device also and click on submit button to save the details.

After completing these steps then you will be able to view all your details in this portal and will now be able to control the thermostat remotely also. So, this is how you set up your thermostat so that you can handle it remotely also.

Sale
Honeywell Home RCHT9610WFSW2003 T9 WiFi Thermostat with 1 Smart Room Sensor, Touchscreen Display, Alexa and Google Assist, White
  • LIVE AND SLEEP SMARTER. Choose the temperature in a specific room, like the bedroom, to be exactly...
  • AMAZING SENSOR RANGE. The battery powered Smart Room Sensors utilize unique Honeywell Home...
  • MULTI-ROOM FOCUS. Don’t be forced to choose one room over another, the T9 Smart Thermostat can...
  • SAVE MONEY AND ENERGY. Adjust your thermostat from anywhere with your mobile device, or let your...
  • SMART RESPONSE AND ALERTS. Intelligently learns your home’s heating and cooling patterns to...

Wrap it Up

Connecting your Honeywell Thermostat with Internet is easy if you will follow the steps accordingly.

The only important thing is to have a fast internet speed through which you can monitor your Honeywell Thermostat and control it simultaneously.

Leave a Reply